99.5% Purity Industrial Oxygen Cylinder 40L Seamless Steel With CGA540 Valve
99.5% certified oxygen in 40L seamless 37Mn steel cylinders, 150bar working, CGA540 oxygen-clean brass valve. Batch COA, hydrostatic test and UN1072 docs included. ISO 9809-1 compliant; alternative outlets available on request.
industrial oxygen cylinder 40l
,99.5% purity industrial oxygen cylinder
,40l oxygen gas cylinder
99.5% Purity Industrial Oxygen Cylinder 40L Seamless Steel with CGA540 Valve for Certified Gas Supply
Industrial oxygen buyers do not purchase "high purity" as a phrase. They purchase a certified assay, because cutting speed, kerf width and weld preheat all shift when oxygen content drops. This cylinder is filled to a minimum of 99.5 percent oxygen, verified on every batch, and the analysis report travels with the shipment.
The gas is drawn from a liquid oxygen source, vaporised, and filled into cylinders that have been degreased and inspected before connection. No oil, grease or hydrocarbon lubricant touches a valve or fitting at any point in the process — the single control that keeps an oxygen system from becoming a fire hazard.
| Parameter | Specification |
|---|---|
| Oxygen purity | 99.5% minimum, batch certified |
| Water capacity | 40L |
| Working pressure | 150 bar at 20°C |
| Test pressure | 250 bar hydrostatic |
| Cylinder body | Seamless steel 37Mn, 5.7 mm wall |
| Outside diameter | 232 mm |
| Height | 910 mm without valve |
| Tare weight | 38 kg |
| Valve outlet | CGA540 brass, oxygen clean, cap fitted |
| Design standard | ISO 9809-1, GB 5099 |
A cylinder that arrives with the wrong outlet thread is unusable until an adaptor is sourced, and adaptors on oxygen service are a known ignition risk. The CGA540 outlet on this cylinder matches the regulator and manifold standard used across North America, the Middle East and much of Southeast Asia, so equipment already on site connects directly.
For buyers running European equipment, the same cylinder is available with a pin index or BS341 No.3 outlet on request, and the valve thread can be supplied to W21.8 or M25 neck standards.
- Batch certificate of analysis stating oxygen assay and moisture content
- Hydrostatic test certificate with test date and next inspection interval
- Material certificate for the cylinder body
- Safety data sheet and UN1072 dangerous goods transport declaration
Site safety officers can audit the filling record, the cylinder marking and the test history before unloading, which removes the usual delay at receiving.
Before filling, each cylinder is emptied, purged and visually inspected through the valve port for moisture, scale or oil residue. Filling is done by weight and pressure together, then the valve is leak tested and the unit is capped. Cylinders that fail visual inspection are set aside for reconditioning rather than filled — which is why the batch record and the cylinder serial number always match.